Multifunctional stud detector with LCD display and acoustic alarm for locating power lines, wooden beams and metal pipes

• High accuracy and fast positioning: The latest sensor technology with high accuracy helps you to quickly locate metal hidden in walls, floors and ceilings, wood behind plasterboard or AC cables and helps you to install televisions, cabinets and garage shelves. Find the exact location in time.
• 5 scanning modes: 5-in-1 scanning mode with advanced foreign object detection technology (wood mode, there are 3 modes with a depth of 10mm/20mm/38mm), metal mode can detect pipes with a depth of 38mm as well as steel bars and non-ferrous metals can be up to 20mm deep, while AC mode can detect wires at a depth of 38mm.
• LCD display and buzzer: The LCD display can show detection mode, depth, signal strength and battery level. When an object is found, the signal strength and buzzer volume will let you know if you are approaching the center of the target.
• Calibration and auto power off: When calibration is required, simply lift the instrument into the air and then press and hold the wooden test button to automatically calibrate. It will automatically shut down if there is no operation for about 5 minutes.
• Packing list: Ergonomic design and packaging: the firm grip allows you to hold the stud finder firmly and move it correctly for more accurate results. The package includes 1 * Stud Finder, 2 * 1.5V AAA batteries, 1 * storage bag, 1 * instruction manual, 1 * operation card

The stud finder is equipped with advanced sensor technology to accurately detect metal (rebar, copper pipes), cables hidden in walls, ceilings and floors, wooden beams, metal and cables under plasterboard. Never worry about drilling useless and wrong holes in the wall again.

Why choose this cable finder?

If you need to renovate the house, repair the water pipes in the garden or find the electrical wiring in the wall, you may need a reliable helper. This wall detector will be your most faithful companion.

This cable finder is a device that is used to determine the exact position of framing screws in a wall. This multi-scan stud finder uses electronic signals to quickly locate the edges and centers of metal, studs, joists, pipes and live AC wiring as well as AC wiring behind walls, floors and ceilings.

Calibrate before use
1. press the mode button to select the desired function. press the auto-calibration button on the side of the wall scanner before each scan and calibrate in the air. (In stud/depth mode, place it on the wall to be calibrated. In AC metal mode, place it in the air for calibration to avoid environmental interference from electromagnetic fields). Calibration is completed after a short beep.
2. in addition, it is also equipped with a manual for operation steps, which can be easily operated by beginners.

Stud scan inspection
1. this stud finder has 3 stud scan modes. The deep scan mode scans drywall up to a depth of 10/20/38 mm.
2. press the left button (wood detection) to switch the precision/depth mode

Metal detection mode
1. metal scan mode can detect 20 mm non-ferrous metals (e.g. copper pipes) and 38 mm ferrous metals.
2. press and hold the left button and on/off button at the same time to turn the sound on/off

Live AC wire detection
1 in this mode, you can detect unshielded AC wires and cables up to 38 mm deep under voltage. 
2. also detects and alerts live AC cables in metal mode for safety reasons

Simple and easy to use
1. long press the left button to calibrate and start measuring
2. adjust the position and slowly move to the position to be detected (the picture shows that it is close to the detection edge)
3. find the center of the bolt and beep



Goods Condition: New / Unpacked

Tags: scanner detector