To operate it, the Homematic IP Access Point is required in conjunction with the app (cloud service), the Smart Home Central Unit CCU3 or a suitable partner solution.

Modern, fully electronic trailing edge phase dimmer for particularly quiet operation without noise (compared to older dimmers)

The device may only be installed and operated on a 230 V/50 Hz AC power supply and work on it may only be carried out by a qualified electrician

Optimized for modern lamps and therefore particularly suitable for small loads (e.g. LED)

Connected lights can be dimmed almost continuously in 0.5% steps via the Homematic IP app

Installation: in flush-mounted boxes (device boxes) according to DIN 49073-1 or surface-mounted boxes according to DIN 60670-1 (e.g. Abox 025 or Abox 040)

Smart living that inspires.

Homematic IP is the new generation of the successful Homematic smart home system from eQ-3. The range includes products from the areas of indoor climate, security, weather, lighting and shading as well as numerous accessories. Thanks to the radio communication of the devices, the system is particularly easy to retrofit in your own home.

Homematic IP dimmer actuator flush-mounted

The flush-mounted dimmer actuator is part of the Homematic IP smart home system and can be used to install or switch off lights as well as to dim them. The dimmer actuator is compact, so it can be conveniently placed in standard flush-mounted or surface-mounted boxes. Existing lighting systems can be modernized in just a few steps by using existing cables and can be controlled in the future using a remote control, a wall switch or the free smartphone app.

The flush-mounted dimming actuator enables the dimming and switching on/off of many dimmable LED lamps, dimmable energy-saving lamps, low-voltage halogen lamps, high-voltage halogen lamps and incandescent lamps.

Optimized for modern, energy-saving light sources (e.g. LED).

Fully electronic phase control dimmer enables silent operation.

Connected lights can be dimmed almost continuously in 1% increments via the Homematic IP app or via wall switch/remote control.

Smart Home is easy

The entire solution can be set up intuitively and conveniently controlled using the free smartphone app. The individual devices are configured in the Homematic IP cloud service. Homematic IP uses the 868 MHz radio band. Interference from WLAN, Bluetooth, video streaming or other users on 2.4 GHz is excluded.

Tags: Homematic IP, switch, drive, meter, smart home, light control, curtain control, energy consumption tracking, installation, compatibility.