Somfy 2400670 - MS 100 | Wired Motorization Kit for Traditional Roller Shutters | 10 Nm

Reduced goods

• Complete kit to motorize a roller shutter with crank installed on a window (see MS 200 for a French window).
• The MS 100 kit is compatible with windows with a maximum surface area of 3.4 m². Please refer to the dimension chart (see presentation photos).
• Suitable for PVC or aluminum shutters
• Designed for roller shutters with traditional or tunnel boxes
• Telescopic, octagonal Somfy motorized shaft, diameter 60 mm. Supplied with adaptation accessories
• Wired technology: roller shutter control from the switch supplied in the kit

Motorize your roller shutter with MS 100

Thanks to the motor, the chore of cranking is a thing of the past!

Are you a do-it-yourselfer looking to motorize your roller shutter?

With Somfy's MS 100 all-in-one kit, you can modernize a manual roller shutter for traditional or tunnel boxes.

The kit contains all the accessories you need to transform your manual roller shutter into an electric one:

1 3-part telescopic tube with integrated motor and 2.5m cable

1 wired wall switch

2 sets of 3 shutter-to-tube clips for 9 and 14mm slats

1 motor-to-box mounting bracket

1 tube-to-box mounting bracket

1 screw kit

1 installation guide

Somfy MS 100 do-it-yourself roller shutter motorization kit

Installation advantages

The motor is already integrated into the winding tube. The tube is telescopic and adjusts to the width of your installation.

Step-by-step instructions and video. Do you have a particular problem with your installation? Ask your question on the Somfy forum!

Ease of use

Go from the drudgery of cranking roller shutters to the comfort of motorization.

Open and close your roller shutters with a single flick of the switch.

Peace of mind

Close your shutters even for short absences.

Stop your shutter travel at any time, up or down.

Motorize your shutter by following each step

Somfy provides detailed instructions and an installation video to watch before you start installing your motorized shaft.

The first step is to dismantle the crank shaft located in your box. Roll over the thumbnails below to understand how to install an MS kit.

Adjust the telescopic tube

The telescopic tube makes it easy to adapt to your shutter. Adjust it to the right width and it's ready to be mounted on your system.

For shutters wider than 170 cm, you'll need our tube extension (ref. 2400456) to motorize shutters up to 240 cm wide.

Reassemble the motorized shaft

Thanks to the universal motor bracket supplied in the kit, you can mount your new motorized shaft in the original box.

The other accessories in the kit will enable you to attach the shutter curtain to the newly installed shaft.

Adjust your motor quickly

Once the motorized shaft has been installed in your shutter, simply press the push-buttons on the motor head to set the limit switches.

Follow the instructions in the manual or in the video.

• Product Status: Reduced goods

Tags: Motorization kit for roller shutter